Example Quote: 12 Units (Signs & Posts) Total $188 Per Unit
For just 1 unit $313 plus tax
White Sign Post (Frame Fits signs 24 or 30 inches wide). 66 inch 2-piece post.
Aluminum caps on the post / arm powder coated match the post.
Includes steel stake / hardware to hang sign.
Steel ground stake, 2 eyebolts, 2 safety pin clips,
2 sign rider clips with screws, arm with caps, 2-piece post with cap..
Sign Fastener locations 16 inches or 19 inches apart on center.
6mm Heavy Duty Coroplast Signs 30″x40″(vertical flutes), 2 grommets double sided
Post: 66 inches x 2 3/4 inches x 2 1/4 inches (2-piece post)
Arm: 41 inches x 2 3/4 inches x 2 1/4 inches
Stake: 32 inches long – 1 1/2 inch steel angle iron
Install Tips:
CAUTION: HAVE ALL UNDERGROUND UTILITIES MARKED BEFORE INSTALLATION
1. Pound the stake into the ground to a sufficient depth (a small sledge hammer is ideal).
2. Slide the lower post (with sleeve) over the stake.
3. Slide the upper post over the sleeve on the lower post, fasten with screw.
4. Attach the arm to the post.
5. Screw the eye bolts into the threaded grommets to the desired depth. Attach your sign to the eye bolts with the safety pin clips. attach the optional rider clips to the top of the arm as desired.
You must be logged in to post a comment.